Shipbuilding mud box - national standard bilge cement box, right angle clay box, type -DIN carbon steel net cage
We have the following models for the construction of ship's mud boxes for the accessories of the Yangzhou flying ship:
CB/T3198-94 marine right angle mud box
CBM1062-81 marine mud container (similar to JIS, F7203-1978, Japanese standard, ship's mud box)
Type DIN German standard carbon steel cage Carbon, Steel, Mud, Boxes
(corresponding material code: IMP872065-72070)
Marine clay box - bilge cement box - Marine rectangular clay box type -DIN carbon steel cage; main function:
The mud box is mainly used in bilge suction port of engine room. It is used in the bilge suction pipe which is installed in the machine house and the shaft tunnel. It is used to block the dirt of cotton yarn, cloth, oil and dirt into the suction pipe.
Bilge water system including: bilge pump, bilge main, branch pipe, suction filter, distribution valve box, mud box, sewage oil separator and other equipment, also there should be emergency drainage pipe, so that in case of emergency cabin water, through emergency drainage pipes from the main circulating pump or the main cooling water pump drainage.
Brief introduction of material for ship's mud box rectangular mud box parts:
Mud Box
|
Type
|
Size
|
Body material
|
Filter cylinder form
|
Filter material
|
Flange Connection
|
A(Straight type) (B,BS)
|
50A~250A
(DN50-DN250)
|
Cast Steel
Stainless Steel etc3
|
Settling tray
|
SS400, SUS304 , SUS316
|
gb,jis
|
The material of the clay box and cover is Q235-A, the material of the filter plate is 1Cr18Ni9Ti, and the ratio of the flow area of the filter plate to the nominal diameter section of the mud box is not less than 3;
The mud box of hot galvanizing, zinc dipping layer minimum weight 610g/m2, or plastic processing, plastic layer thickness of 0.15 mm.
Marine mud boxes - right angle mud boxes:
A type - flange connection size press CB/T46 through the mud box;
AS type - flange connection size press GB2506 through the mud box;
B type - flange connection size press CB/T46 right angle mud box;
BS type - flange connection size press GB2506 right angle mud box.
Marine clay box cement tank for ship purpose rectangular clay box -DIN carbon steel cage for supporting use:
The cabin bottom mud sometimes need to add a suction port,
In the machine house and the shaft tunnel, the pipe end of the bilge suction port shall be straight pipe and vertical to the mud box, so that it is easy to check and clean.
Here, we briefly introduce the difference between a ship's clay container and a marine filter or a coarse water filter:
The mud box is usually used in the bilge water system of the engine room. The mud box is actually a coarse water filter, which filters large impurities, which is actually a large volume water filter
The sludge tank is used at the bilge suction port of the machine house, and the filter is usually used at the suction port of the pump
The marine clay container is also distinguished from the marine water filter (suction crude water filter)
A flange is under the cylinder, and the filter flanges are on the sides of the barrel